LMT KIENINGER SpeedLift 可提供配合面和導軌面的有效銑削

This innovation optimizes an especially important job in die and mould making: SpeedLift delivers efficient milling of fitting and guide surfaces.

無人生產、硬質材料以及復雜的切削工作是模具制造工藝所必須面臨的一些挑戰。在這樣的背景下，對定制型創新刀具的需求量相當可觀。其中一種突出的刀具產品是LMT 基寧格的SpeedLift 插銑系統。這是專門為配合面和導軌面的半精加工和精加工所研發的一款產品。它可以在插銑過程中保證垂直度和平行度。在總長達300 毫米的范圍內，其最大偏差只有0.01 毫米 – 甚至在650毫米以上的較大長度下，也是如此。

Unmanned production, hard materials and complex cutting jobs are just some of the difficult challenges that have to be met in die and mould making. Against this background, there is considerable demand for tailormade tool innovations. An outstanding example of this is LMT Kieninger’s innovative SpeedLift plunge milling system. It was specially developed for the semifinishing and finishing of fitting and guide surfaces. Absolute preservation of angularity is guaranteed in drawing and plunge milling. Over a length of 300 millimetres the maximum deviation is only 0.01 millimetres – and that is even the case with large tool projecting lengths of more than 650 millimetres.

使用刀具系統進行加工，不僅能夠獲得Rz值小于5μm的工件表面質量，而且操作起來非常簡單。此外，它的構成組件也是最少的，刀具的二維調節確保其徑向跳動小于3μm。可更換式刀夾及特殊的連接方式使得產品具有靈活應用的特點。直徑為66毫米至80毫米的插銑系統配有相應的6 或 8片CBN刀片。這些特點使得產品實現最大的切削速度，從而大大減少了銑削時間。

The tool system not only enables workpiece surface qualities with Rz values of less than 5μm, but also offers simple handling. A minimum number of components enables high-precision, two-dimensional adjustment of the cutters with a radial runout of less than 3μm. The form- and force-fit connection of the exchangeable cartridges enables flexible use. The 66- and 80-millimetre diameter plunge milling systems are equipped with 6 or 8 CBN inserts respectively. These are capable of achieving maximum cutting speeds, which result in dramatically reduced milling times.

SpeedLife 成功案例

Success Story：SpeedLife